Unlike other spray-on coatings systems available, QWIK LINER® utilizes a pneumatically driven spray gun that dispenses 1:1 100% solids coating held in disposable cartridges. This gives you the applicator a chance to spray the best product available at an economical price. Take a look at some of the benefits when you become a QWIK LINER® applicator.
The QWIK Liner is the lightest spray-on hybrid polyurea system available, making it ideal for mobile applications where other machines can not deliver. The QWIK Liner system is completely air driven.
The interchangeable cartridges come in colors too, pre-mixed into the resin and ready to spray. With low- pressure delivery via your standard air compressor, the trouble-free QWIK LINER® system utilizes disposable parts saving you time and money on expensive replacement parts and repair bills. Ideal for repair shops, restoration projects, truck bedliners or any other coatings application imaginable, the QWIK LINER® system is the perfect add-on to any shop looking to start spraying a real 100% solids product at an affordable price.
Low Cost Start-up
Will not Warp, Crack or Peel
Low / No Maintenance Cleanup
High UV Stability
Low Cost Replacement Parts
100% Solids , Non-Sag Polyurethane Polyurea Caulking Compound
QwikRepair is a two component aromatic, 1:1 ratio, rapid setting, non-sag, 100% solids, polyurethane polyurea caulking compound for bonding application.
100% Solids Meets VOC Regulations
Sandable in 20-30 minutes
Meets USDA Criteria
Non-Sag in Vertical Application
Meets California VOC and SCAQMD Requirements
QwikRepair is used as bonding agent for plastics, masonry, wood, polyurethane EPS and other surfaces.
Automobile Bumper Repair
Note: QwikRepair will discolor in exterior applications.
Side-A Black, Side-B Clear
100 x 100ml cartridge: Side-A 100ml and Side-B 100ml
For best results use a Cartridge Dispensing System, preheating as necessary.
This material can be applied at temperatures from 32°F (0°C) to as high as 135°F (57°C).
The product needs to be conditioned at 75-80°F prior to use.
Allow QwikRepair to cure for 20-30 minutes before sanding.
Cured product may be disposed of without restriction. Mix excess A and B material and allow to cure. Check local, state and federal laws before disposing of material.
QwikRepair should be stored at 60-90°F (15-35°C).
QwikRepair has a shelf life of one (1) year from date of manufacture in original, factory sealed containers.